Furnace & Heating Repair in St. George, UT

Heat back on before the desert night drops

Gas furnaces and electric heat repaired around the clock across St. George and Hurricane, with a safety check on every call.

Heating Repair in St. George

Mild winters still have cold nights

St. George afternoons in January can feel easy, but clear skies let the heat escape fast after dark, and overnight lows near freezing are common. A furnace that sat unused through a long summer tends to show its problems on that first cold night: an igniter that won’t glow, a flame sensor coated in dust, a blower motor that hums and stalls.

Element handles furnace repair in St. George around the clock, on gas furnaces, electric heating systems and heat pumps. Every repair includes a safety check of the burners, venting and gas connections, because a heating problem can also be a carbon monoxide or gas problem. If you smell gas, leave the house first and call from outside. If the trouble turns out to be in the supply piping, we handle gas line repair as well.

  • Answered All Night No heat at 2 a.m. still gets a real person on the phone.
  • Safety Checked Burners, venting and gas connections tested on every repair.
  • Clear Pricing The repair price is set and approved before we begin.
Element technician repairing a gas furnace in a St. George home

Symptom Check

Signs you need furnace repair in St. George

Try the thermostat batteries and a fresh filter first. If any of these continue, call us.

  • Cold Air from the Vents

    The blower runs but the burners never light or shut off early.

  • Clicking with No Flame

    Repeated clicks without ignition usually point to the igniter or gas valve.

  • Starts and Stops

    Short bursts of heat followed by shutdown often mean a dirty flame sensor.

  • Banging or Screeching

    Loud noises at startup suggest delayed ignition or a worn blower.

  • Electric Heat Not Working

    Baseboard or wall heaters that stay cold may have a failed element or control.

  • Gas Odor or CO Alarm

    Get everyone outside first, then call. Treat this as an emergency.

What We Repair

Gas and electric heating repairs

The failures we see most in Southern Utah homes, fixed and tested.

Element technician testing a furnace control board in a St. George, Utah home
  • Igniters & Flame Sensors Cracked igniters and dirty sensors that stop the burners lighting.
  • Blower Motors Motors and capacitors that leave heat trapped in the furnace.
  • Gas Valves & Burners Valves, pressure and burners adjusted or replaced for a clean flame.
  • Electric Heaters Baseboard and wall heater elements, wiring and limit controls.
  • Thermostats & Boards Control boards, limit switches and thermostat wiring diagnosed.
  • Venting & CO Safety Flue, draft and carbon monoxide checks after every repair.

How It Works

From no heat to a warm house

Common furnace repairs are often finished in one trip.

  1. Call Day or Night

    Describe what the heater is doing and we’ll get a technician moving.

  2. Find the Fault

    We test ignition, gas supply, airflow and controls.

  3. Approve the Fix

    You see the price, and a replacement option if the furnace is near its end.

  4. Repair and Safety Test

    We fix it, check venting and CO, and confirm steady heat.

Southern Utah crews. Desert‑tough service.

Why Southern Utah homeowners choose Element

Built for desert homes

110° summers that push air conditioners to the limit and hard water that wears out water heaters and fixtures — we know your climate.

Two offices, one local team

Real offices in St. George and Hurricane, with crews serving Washington, Santa Clara, Ivins, Cedar City and Springdale — not a call center.

Award-winning work

Voted Best of Southern Utah Gold in 2025 and 2026, and Best of Iron County 2025.

Here 24/7

Burst pipe at 2 a.m. or no AC on a 110° Sunday — a real technician answers the call.

Woke up to a cold house?

Our St. George heating team is on call 24/7. Ask about $50 off any HVAC service.

Maintenance Membership

Ready for 110° desert summers.

Seasonal checkups for every system in your home.

Seasonal checkups catch small problems before they become emergencies — and keep your systems running efficiently all year.

  • Annual whole-home plumbing inspection
  • Water heater flush & safety check
  • Seasonal heating & AC tune-ups
  • Priority scheduling for members
  • Member savings on repairs

Heating repair questions from St. George homeowners

What can I check before calling for furnace repair?

Confirm the thermostat is on heat and set above room temperature, and replace its batteries if the screen is blank. Swap a dirty filter, check the breaker and make sure the furnace door is closed tightly, since many units won’t run with it ajar. If it still won’t heat, call us.

What should I do if I smell gas?

Leave the house with everyone, don’t switch lights or appliances on or off, and call the gas utility and us from outside. Don’t go back in until the source is found. We repair furnace gas connections and supply piping; see gas line repair.

Do you repair electric wall and baseboard heaters?

Yes. Many St. George casitas, additions and older homes rely on electric heat. We test the elements, wiring, limit switches and thermostats, then repair or replace what has failed. For whole-home electrical issues, our electrical repair team can help too.

When does replacing the furnace make more sense?

If the furnace is older, needs a costly part like a heat exchanger or has failed several times, replacement often costs less over the next few years. We’ll price both honestly. See heating installation. Either way, the decision is yours, and we won’t pressure you.

Do you offer furnace service in St. George before winter?

Yes. Book a tune-up each fall, before the first cold week. We clean the burners and flame sensor, test the igniter and blower and run a safety check. The $59 furnace tune-up offer covers one system. Fall visits also get the widest choice of appointment times.

What does it cost to fix a furnace in St. George, Utah?

The failed part decides most of it. An igniter, flame sensor or thermostat is a small repair; a blower motor, control board or gas valve costs more; a cracked heat exchanger on an older unit usually means talking about replacement instead. The furnace’s age and type and how easy it is to reach also matter. We test first, then give you a written, upfront price before any part is replaced, with $50 off any HVAC service applied. See all our heating and air services.

*Offers cannot be combined with other promotions or applied to dispatch fees. No cash value. Must present offer at time of service. Call for details.

Something not working? We’re in our element.

So you can be in yours. Book online in minutes or talk to a local technician now.

(435) 268-1342 Book Now